SERVANT EG

Stain Removal

In addition to cleaning wood floors, Murphy Oil Soap makes a great laundry pre-spotter, especially on organic stains like grass or blood. Wet washable, colorfast fabric, add a drop of Murphy directly to the stain, squish through the fabric and wash as usual. Visit for more cleaning tips.

 

Ceramic tile floors

No need to wax.. Just sweep and mop on a regular basis and they stay clean and shiny. Mop floors with clear water or just a dash of liquid dish soap. Be sure to change the water when it gets cloudy. Too much soap or dirty water will make floors dull or sticky. Don't use scrub pads on ceramic tile floors or you might scratch them. Our professional cleaners wash most floors by hand, cleaning and drying a small area at a time.

 

Grout

Old grout may need cleaning with a wax stripper or heavy-duty cleaner plus a grout brush. Use a bleaching cleanser on tough spots. Once the grout is as clean as you can get it, rinse it well. When it's thoroughly dry, apply a coat of masonry sealer so that it doesn't absorb dirt in the future.

 

For mildewed grout in tubs or showers, use a grout brush with a 1:5 solution of chlorine bleach and water. Never use bleach in combination with any ammonia-based product and be sure the area is well-ventilated. When you've finished cleaning, rinse the area well to remove all traces of bleach.

 

Clean colored grout with a heavy-duty cleaner and a grout brush, but don't use bleach because this may remove the color from the grout. Be sure never to use a bleaching solution on colored grout. A masonry sealer can be applied to clean, colored grout to ward off future stains.

 

Hard water spots

Hard-water deposits are alkaline, so an acid-based cleaner is the best way to clean them. Phosphoric acid works well and is safe for most surfaces. Grocery store cleansers with phosphoric acid contain 4 percent to 6 percent acid. You can purchase lime scale removers at janitorial supply stores that contain 8 percent to 12 percent acid to get the job done faster. A higher concentration of acid is safe on most household surfaces as long as you rinse the surface to remove all traces of the acid after the cleaning is complete. Let the acid sit for a few minutes after you apply it to let it work. Tough hard-water deposits may take more than one application. Scrub the applied areas with a white, nylon-backed scrub sponge. Make sure you read any manufacturer's warnings before applying phosphoric acid solutions to surfaces in your home.